Yayınlar
2022
|
|
Makale Başlığı |
Dergi |
DOI |
|
1. |
Development of visible light active self-cleaning clay roofing tiles as novel building materials: An investigation on the effects of α-Fe2O3 coating and firing temperature |
Journal of Cleaner Production |
|
|
2. |
Foam Concrete Produced with Recycled Concrete Powder and Phase Change Materials |
Sustainability |
|
|
3. |
Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash |
Archives of Civil and Mechanical Engineering |
|
|
4. |
Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge |
Construction and Building Materials |
|
|
5. |
Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance |
ENERGY AND BUILDINGS |
|
|
6. |
Recycling of metallurgical wastes in ceramics: A sustainable approach |
Construction and Building Materials |
|
|
7. |
Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement |
Structural Concrete |
|
|
8. |
Effect of nanofiber as nanopore maker agent on the performance of clinker bricks |
Construction and Building Materials |
|
|
9. |
Manufacturing of fired bricks derived from wastes: utilization of water treatment sludge and concrete demolition waste |
Archives of Civil and Mechanical Engineering |
|
|
10. |
Experimental evaluation of the luminescence performance of fired clay brick coated with SrAl2O4:Eu/Dy phosphor |
Ceramics International |
|
|
11. |
An experimental approach to a cementitious lightweight composite mortar using synthetic wollastonite |
Construction and Building Materials |
|
|
12. |
Preparation and characterization of anorthite ceramics from sugar production solid waste: a statistical analysis of grinding parameters |
Journal of the Australian Ceramic Society |
|
|
13. |
Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete |
Solar Energy |
|
|
14. |
Recycling of marble cutting waste additives in fired clay brick structure: a statistical approach to process parameters |
Environmental Science and Pollution Research |
|
|
15. |
Effects of expanded vermiculite on the properties of fired bricks from water treatment sludge |
International Journal of Applied Ceramic Technology |
|
|
16. |
Recycle of ground granulated blast furnace slag and fly ash on eco-friendly brick production |
European Journal of Environmental and Civil Engineering |
|
|
17. |
Recovery of Pressed Titanium Alloy Machining Chip via Vacuum Induction Melting |
Scientific Research Communications |
https://dx.doi.org/10.52460/src.2022.001
|
|
18. |
A review on alternative raw materials for sustainable production: novel plant fibers |
CELLULOSE |
|
|
19. |
Synthesis of hierarchical hetero-composite of graphene foam/α-Fe2O3 nanowires and its application on glucose biosensors |
Journal of Alloys and Compounds |
|
|
20. |
Modeling and Optimum Design of Carbon Nanotube/Polyvinyl Alcohol Hybrid Nanofibers as Electromagnetic Interference Shielding Material |
Integrating Materials and Manufacturing Innovation |
|
|
21. |
Screen Printed Carbon Electrodes Modified with 3D Nanostructured Materials for Bioanalysis |
Electroanalysis |
|
|
22. |
A Review of Environmentally Friendly Approaches in Fire Extinguishing: From Chemical Sciences to Innovations in Electrical Engineering |
Polymers |
|
|
23. |
Synthesis of an injectable heparin conjugated poloxamer hydrogel with high elastic recoverability for temporomandibular joint disorders |
Journal of Applied Polymer Science |
|
|
24. |
A novel gypsum-based lightweight composite: a combined investigation of technical and self-cleaning properties |
Journal of the Australian Ceramic Society |
|
|
25. |
Vacuum Arc Melted and Heat Treated AlCoCrFeNiTiX based High-Entropy Alloys: Thermodynamic and Microstructural Investigations |
Journal of Alloys and Compounds |
|
|
26. |
Li-doped ZnO nanowires on flexible carbon fibers as highly efficient hybrid antibacterial structures |
Journal of Alloys and Compounds |
|
|
27. |
Fabrication of Porous Anorthite Ceramics Using Eggshell Waste as a Calcium Source and Expanded Polystyrene Granules |
Journal of Polytechnic |
2021
|
|
Article Title |
Source Title |
DOI |
|
1. |
Influence of end groups variation of self assembled monolayers on performance of planar perovskite solar cells by interface regulation |
Materials Science in Semiconductor Processing |
|
|
2. |
Farklı Yöntemlerle Sentezlenmiş olan ZnO’in Organik Güneş Hücrelerinde Verim Üzerine Etkisi |
Mühendislik Bilimleri ve Araştırma Dergisi |
|
|
3. |
Solution-processed small-molecule organic solar cells based on non-aggregated zinc phthalocyanine derivatives: A comparative experimental and theoretical study |
Materials Science in Semiconductor Processing |
|
|
4. |
ZnO konsantrasyonunun organik güneş hücrelerinde verime etkisi |
Konya Journal of Engineering Sciences |
|
|
5. |
Gamma and neutron attenuation characteristics of bricks containing zinc extraction residue as a novel shielding material |
Progress in Nuclear Energy |
|
|
6. |
Effect of firing temperature on self-cleaning and photocatalytic performance of clay-based bricks under visible light irradiation |
Journal of the Australian Ceramic Society |
|
|
7. |
Investigation of the residential building having novel environment-friendly construction materials with enhanced energy performance in diverse climate regions: Cost-efficient, low-energy and low-carbon emission |
Journal of Building Engineering |
|
|
8. |
Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study |
Construction and Building Materials |
|
|
9. |
Physico-mechanical, durability and thermal properties of basalt fiber reinforced foamed concrete containing waste marble powder and slag |
Construction and Building Materials |
|
|
10. |
Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications |
Construction and Building Materials |
|
|
11. |
Recycling industrial slags in production of fired clay bricks for sustainable manufacturing |
Ceramics International |
|
|
12. |
A novel energy-effective and carbon-emission reducing building materials containing bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics |
Journal of Energy Storage |
|
|
13. |
Combined effects of bayer process bauxite waste (red mud) and agricultural waste on technological properties of fired clay bricks |
Journal of Building Engineering |
|
|
14. |
Effect of waste marble powder and rice husk ash on the microstructural, physico-mechanical and transport properties of foam concretes exposed to high temperatures and freeze-thaw cycles |
Construction and Building Materials |
|
|
15. |
Recycling and immobilization of zinc extraction residue in clay-based brick manufacturing |
Journal of Building Engineering |
|
|
16. |
The combined effect of bottom ashes and cellulose fibers on fired clay bricks |
Construction and Building Materials |
|
|
17. |
New construction materials synthesized from water treatment sludge and fired clay brick wastes |
Journal of Building Engineering |
|
|
18. |
Effect of waste-based micro cellulose fiber as pore maker on characteristics of fired clay bricks |
Construction and Building Materials |
|
|
19. |
Thermal Performance Optimization of Lightweight Concrete/EPS Layered Composite Building Blocks |
International Journal of Thermophysics |
|
|
20. |
Fabrication of Porous Anorthite Ceramics Using Eggshell Waste as a Calcium Source and Expanded Polystyrene Granules |
Journal of Polytechnic |
|
|
21. |
Functionalization of graphene by boronic acid-based organic molecules |
Journal of Applied Physics |
|
|
22. |
Sensitive pH measurement using EGFET pH-microsensor based on ZnO nanowire functionalized carbon-fibers |
Nanotechnology |
|
|
23. |
An Overview on Recent Progress of Metal Oxide/Graphene/CNTs-Based Nanobiosensors |
Nanoscale Research Letters |
|
|
24. |
Investigation of graphene-based Schottky junction solar cell with heavy-doped silicon |
Journal of Materials Science: Materials in Electronics |
|
|
25. |
Novel eco-friendly flame retardant wood composites reinforced by huntite and hydromagnesite minerals |
Wood Material Science & Engineering |
|
|
26. |
Effects of hot isostatic pressing and heat treatments on structural and corrosion properties of direct metal laser sintered parts |
RAPID PROTOTYPING JOURNAL |
|
|
27. |
Numerical Analysis of the Cooling System Performance and Effectiveness in Aluminum Low-Pressure Die Casting
|
International Journal of Metalcasting |
|
|
28. |
Effect of Al2O3 Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites |
International Journal of Metalcasting |
|
|
29. |
Statistical Relationship Between Strontium Content and Cooling Rate on A356 Alloy by Using Regression Analysis |
Journal of Intelligent Systems with Applications |
|
|
30. |
Effects of various heat treatments on microstructure and mechanical properties of investment cast Co-Cr-Mo implants |
Cumhuriyet Science Journal |
|
|
31. |
Investigation of the Effect of Heat Treatment Conditions on Hardness Properties of Maraging Steels Produced by Additive Manufacturing |
International Journal of 3D Printing Technologies and Digital Industry |
|
|
32. |
Fracture Analysis of Case Hardening in Kingpins Parts |
European Mechanical Science |
|
|
33. |
Determination Of The Effect Of Cooling Rate And Strontium Amount On Eutectic Si Modification Performance Of A356 Alloy Via Casting Simulation |
Celal Bayar Üniversitesi Fen Bilimleri Dergisi |
|
|
34. |
Influence of Particle Size on the Structure and Properties of 316L Hollow Fiber Membranes Sintered Under Argon Atmosphere |
Düzce Üniversitesi Bilim ve Teknoloji Dergisi |
|
|
35. |
A Constitutive Model for Alginate-Based Double Network Hydrogels Cross-Linked by Mono-, Di-, and Trivalent Cations |
Gels |
|
|
36. |
Physics-informed constitutive modelling of hydrated biopolymer aerogel networks |
Soft Matter |
|
|
37. |
Bir Fenomenolojik Yapısal Modelin Kauçuk Tipi Malzemeler İçin Sonlu Elemanlar Yöntemi Uygulaması |
European Journal of Science and Technology |
|
|
38. |
Structure-Property Relationship on Aggregation-Induced Enhanced Emission of the Spirobifluorene Derivatives including Herringbone, T, and Helical Aggregation Mode in Solid-Phase: Synthesis, Crystallography, Density Functional Theory, Optical, and Thermal Properties |
Journal of Physical Chemistry C |
|
|
39. |
Synthesis, characterization, thermal, and antibacterial activity studies on MgO powders |
Journal of Sol-Gel Science and Technology |
|
|
40. |
Effect of surface modifications of additively manufactured Ti-6Al-4V alloys on apatite formation ability for biomedical applications |
Journal of Alloys and Compounds |
|
|
41. |
Effect of heating rate on structure, morphology and photocatalytic properties of TiO2 particles: thermal kinetic and thermodynamic studies |
Journal of Sol-Gel Science and Technology |
|
|
|
|
|
|
2020
|
Article Title |
Source Title |
Year |
DOI |
|
Effects of concrete waste on characteristics of structural fired clay bricks |
CONSTRUCTION AND BUILDING MATERIALS |
2020 |
10.1016/j.conbuildmat.2020.119362 |
|
Utilization of sugar processing filter cake instead of calcite in production of anorthite based ceramics |
JOURNAL OF CERAMIC PROCESSING RESEARCH |
2020 |
10.36410/jcpr.2020.21.4.425 |
|
Effect of heat treatment parameters on the crystallization of feldspathic-based dental glass-ceramics |
JOURNAL OF ASIAN CERAMIC SOCIETIES |
2020 |
10.1080/21870764.2020.1774973 |
|
Growth of ZnO nanowires on carbon fibers for photocatalytic degradation of methylene blue aqueous solutions: An investigation on the optimization of processing parameters through response surface methodology/central composite design |
CERAMICS INTERNATIONAL |
2020 |
10.1016/j.ceramint.2019.11.244 |
|
Characteristics of lightweight diatomite-based insulating firebricks |
JOURNAL OF THE KOREAN CERAMIC SOCIETY |
2020 |
10.1007/s43207-020-00020-5 |
|
Effect of functional groups of self assembled monolayer molecules on the performance of inverted perovskite solar cell |
MATERIALS CHEMISTRY AND PHYSICS |
2020 |
10.1016/j.matchemphys.2020.123435 |
|
Synthesis, characterization, aggregation-induced enhanced emission and solvatochromic behavior of dimethyl 4 '-(diphenylamino)biphenyl-3,5-dicarboxylate: experimental and theoretical studies |
NEW JOURNAL OF CHEMISTRY |
2020 |
10.1039/d0nj01720e |
|
Electroluminescence performance of a series of fluorene/2,5-di(2-thienyl)-1H-pyrrole polymers |
COLOR RESEARCH AND APPLICATION |
2020 |
10.1002/col.22541 |
|
Performance enhancement of inverted perovskite solar cells through interface engineering by TPD based bidentate self-assembled monolayers |
OPTICAL MATERIALS |
2020 |
10.1016/j.optmat.2020.109910 |
|
Dye sensitized solar cells based on titanium dioxide nanoparticles synthesized by flame spray pyrolysis and hydrothermal sol-gel methods: a comparative study on photovoltaic performances |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T |
2020 |
10.1016/j.jmrt.2019.11.083 |
|
Graphene oxide modified carbon fiber prepregs: A mechanical comparison of the effects of oxidation methods |
EXPRESS POLYMER LETTERS |
2020 |
10.3144/expresspolymlett.2020.90 |
|
Understanding dispersion of copper phthalocyanine alpha blue pigment in polyethylene masterbatch with the use of wax |
COLORATION TECHNOLOGY |
2020 |
10.1111/cote.12506 |
|
Experimental investigation of mechanical and modal properties of Al2O3 nanoparticle reinforced polyurethane core sandwich structures |
MATERIALS TODAY COMMUNICATIONS |
2020 |
10.1016/j.mtcomm.2020.101233 |
|
Preparation and characterization of diatomite and hydroxyapatite reinforced porous polyurethane foam biocomposites |
SCIENTIFIC REPORTS |
2020 |
10.1038/s41598-020-70421-3 |
|
Effect of Al(2)O(3)Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites |
INTERNATIONAL JOURNAL OF METALCASTING |
|
10.1007/s40962-020-00490-7 |
|
A review on recent advances in sandwich structures based on polyurethane foam cores |
POLYMER COMPOSITES |
2020 |
10.1002/pc.25543 |
|
Polyhydroxyalkanoates (PHA): From production to nanoarchitecture |
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES |
2020 |
10.1016/j.ijbiomac.2019.12.181 |
|
Effect of waste fillers addition on properties of high-density polyethylene composites: mechanical properties, burning rate, and water absorption |
POLYMER BULLETIN |
2020 |
10.1007/s00289-020-03454-3 |
|
Use of Thixoforming as a Manufacturing Method for Metallic Composites |
METALS AND MATERIALS INTERNATIONAL |
2020 |
10.1007/s12540-019-00373-5 |
|
Manufacturing radar-absorbing composite materials by using magnetic Co-doped zinc oxide particles synthesized by Sol-Gel |
JOURNAL OF COMPOSITE MATERIALS |
2020 |
10.1177/0021998320927754 |
|
Investigations of Flame Retardant Properties of Zinc Borate Accompanying with Huntite and Hydromagnesite in Polymer Composites |
INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY |
2020 |
10.29227/IM-2020-01-13 |
|
Investigations of microstructure and mechanical properties of brass alloys produced by sand casting method at different casting temperatures |
DEVELOPMENT OF MATERIALS SCIENCE IN RESEARCH AND EDUCATION (DMSRE29) |
2020 |
10.1088/1757-899X/726/1/012018 |
|
Structural properties of cadmium selenide nanowires prepared by chemical bath deposition for the electrical and photosensitive characteristics of the p-Si/CdSe heterojunction |
JOURNAL OF PHOTONICS FOR ENERGY |
2020 |
10.1117/1.JPE.10.025502 |
|
Effects of Stirring Duration and Casting Temperature in Ultrasonic Assisted Stir Casting of Al A356 Matrix Composites |
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI |
2020 |
|
|
Laser cladding of TiC reinforced 316L stainless steel composites: Feedstock powder preparation and microstructural evaluation |
POWDER TECHNOLOGY |
2020 |
10.1016/j.powtec.2020.07.100 |
|
Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy |
RAPID PROTOTYPING JOURNAL |
2020 |
10.1108/RPJ-07-2019-0180 |
|
Numerical Analysis of the Cooling System Performance and Effectiveness in Aluminum Low-Pressure Die Casting |
INTERNATIONAL JOURNAL OF METALCASTING |
|
10.1007/s40962-020-00446-x |
2015
|
M. Erol et.al “Photocatalytic degradation of cyanide in wastewater using new generated nano-thin film photocatalyst”, Surface and Coatings Technology, Accepted Proof, doi:10.1016/j.surfcoat.2014.12.032 (Accepted Manuscript) |
|
M. Erol, et.al “Synthesis and comparison of the photocatalytic activities of flame spray pyrolysis and sol-gel derived magnesium oxide nano-scale particles”, Materials Science in Semiconductor Processing, Accepted Manuscript. |
|
Sutcu M., et.al, Characteristics of fired clay bricks with waste marble powder addition as building materials. Construction and Building Materials. (May 2015) 82: 1–8. |
|
Sutcu M. Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks. Ceramics International (2015) 41 (2): 2819–2827. |
|
M. Erol, et.al, “A comparative study on the photocatalytic activities of microporous and nanoporous TiO 2 layers prepared by electrochemical anodization” Surface and Coatings Technology, 263 (2015) pp. 1-7. |
2014
|
Sutcu M., et.al "Thermal performance optimization of hollow clay bricks made up of paper waste". ENERGY AND BUILDINGS (June 2014) 75: 96–108. |
|
Sutcu M., et.al "Neutron Radiation Tests about FeCr Slag and Natural Zeolite Loaded Brick Samples". SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS, Vol. 2014, Article ID 971490, 5 pages, 2014. doi:10.1155/2014/971490. |
|
Sutcu M., et.al "Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results". ENERGY AND BUILDINGS (February 2014) 70: 135–144. |
|
Sütçü M., Development of lightweight refractory insulating brick using recycled paper processing waste as alternative raw material. Afyon Kocatepe University Journal of Science and Engineering, 14 (2014) OZ5780 p:509−516. |
|
Demic, S. et.al “Synthesis of two tri-arylamine derivatives as sensitizers in dye-sensitized solar cells: Electron injection studies and photovoltaic characterization” SYNTHETIC METALS. 188 (77-85) Feb 2014 |
|
Demic, S; et.al “White organic light emitting diodes based on fluorene-carbazole dendrimers” JOURNAL OF LUMINESCENCE. 146 (6-10) Feb 2014 |
|
Erol, M; et.al “Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process” CERAMICS INTERNATIONAL. 40 (1) (1587-1591) Jan 2014. |
|
Demic S., et.al, Structural investigation of a self–assembled monolayer material 5–[(3–methylphenyl)(phenyl) amino] isophthalic acid for organic light–emitting devices, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy |
2013
|
Sutcu M., et.al "Properties of bricks with waste ferrochromium slag and zeolite". JOURNAL OF CLEANER PRODUCTION (2013) 59: 111–119. |
|
S. Demic, et.al " Electrical Characterizations of Schottky Diodes on ITO Modifed by Aromatic SAMs", ACTA PHYSICA POLONICA A, 123/2, 456-559, (2013) |
|
M.Ö.Seydibeyoğlu, et.al, “Green polyurethane nanocomposites from soy polyol and bacterial nanocellulose” Journal of Materials Science, 48, 2167-2175, 2013. |
|
Ozturk S., et.al, "Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock powder (WC-Co)", Materiali in tehnologije / Materials and Technology, ,Vol. 471 ,pp. 115 - 118, 2013 |
|
Demıc S., et.al, Electrical Characterizations of Schottky Diodes on ITO Modified by Aromatic SAMs, Acta Physica Polonica, A. 123 (2) |
2012
|
S. Demic, et.al, The performance of OLEDs based on sorbitol doped PEDOT:PSS, Synthetic Metals, 161 (23-24), 2734-2738, (2012). |
|
Sutcu M., et.al, “Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition”, Ceramics International, Vol.38, Issue:2 (2012) 1033–1041. |
|
M.Ö.Seydibeyoğlu, “A novel partially biobased PAN-lignin blend as a potential carbon fiber precursor”, Journal of Biomedicine and Biotechnology, ID598324, 1-8, 2012 (doi:10.1155/2012/598324) |
|
M.Ö. Seydibeyoğlu, et.al, “Studies on recyclability of polyhydroxybutyrate-co-valerate bioplastic: Multiple melt processing and performance evaluations” Journal of Applied Polymer Science, 125, E324-E331, 2012, Special Issue: Biopolymers and Renewable Resourced Materials. |
2011
|
S. Demic, et.al, Modification of ITO surface using aromatic small molecules with carboxylic acid groups for OLED applications, Synthetic Metals, 161 (21-22), 2397-2404 (2011). |
|
S. Demic, et.al, Synthesis and Raman spectroscopic investigation of a new self-assembly monolayermaterial 4-[N-phenyl-N-(3-methylphenyl)-amino]-benzoic acid for organic light-emitting devices, Journal of Raman Spectroscopy, 42, 1682–1689, (2011). |
|
S. Demic, et.al, Electrochromic and electroluminescent devices based on a novel fluorene-carbazole-2,5-bis(2-thienyl)-1H-pyrrole hybrid dendron, Journal of Materials Chemistry, 21, 2684–2693, (2011). |
|
S. Demic, et.al, A Novel High-Contrast Ratio Electrochromic Material from Spiro[cyclododecane-1,9’-fluorene]bicarbazole, Journal of Polymer Science B: Polymer Physics, 49 (5), 333–341, (2011). |
|
S. Demic,et.al, Synthesis and Spectroscopic Properties of a Novel Perylenediimide Derivative, Journal of Chemical Society of Pakistan, Vol. 33 (23), 403-411, 2011. |
|
M. Ö. Seydibeyoğlu, et.al, “Characterization of industrial lignins for their utilization in future value added applications”, Biomass and Bioenergy, 35, 4230-4237, 2011. |
|
M..Ö.Seydibeyoğlu, “Excellent adhesion of carbon fibers to polyurethane matrix and substantial improvement of the mechanical properties of polyurethane”, Gazi University Journal of Science, 24, 501-506, 2011 |
|
S. Öztürk, et.al, "Investigation of Wear Behavior of HVOF Sprayed WC-Co Coatings for Automotive Parts in Different Working Conditions", International Journal of Surface Science and Engineering, 5, No:2/3, 180-192, (2011) |
